Showing posts with label electric fireplaces. Show all posts
Showing posts with label electric fireplaces. Show all posts

Tuesday, May 20, 2014

Wiring an electric Fireplace for 240v.?




Renovater


After wiring my cct brkr for 240v I had to have a repairman come in to see why my fireplace did not produce heat. He found that with the 4 wire connection, recommended, I was getting 117v from red to white and 117v from black to white. The problem being is that I also only read 117 from black to red, where it was expected to read 230-240v. Checked the wiring for my dryer which is also 240v, 4 wire and it did read 240v from black to red. Why do I only get 117 when I should be getting 240v?
Thanks everyone. I have already checked all connections. Cct breaker was pretty straightforward. I have the red and black on the single throw, double pole cct brkr. White goes to the neutral bar, bare to the ground bar. Checked at cct breaker, 117 at each from cct brkr from black to white and red to white and both read 117v. Between the red and black it read 0v. I double checked the dryer cct brkr and it read over on my 200v scale leading me to believe it was reading 240v.

It all seems very straight forward but I am not getting the expected values. Connections have been secured. Cct brkr is new and should not pose a problem because it gives me my 117 from each pole. Why would I get 0v when the dryer reads 240v? Is that the only difference between the cct brkrs is the dpst switch? What can I look for next?



Answer
Justwondering and Duncan are right. If you are getting 117V to ground on both legs and 0V difference between them, both breakers are on the same side of the electric service. In a residential single phase service, there are two wires that come out of the transformer from the electric company plus a common ground. Each of those two wires come out of the transformer 180 degrees from the other on the sine curve that alternating current can be represented with. Inside of your electric panel, you'll see a metallic buss bar that the circuit breakers are clipped or bolted to. If you look closely (don't EVER touch this with your body or anything that conducts electricity), you'll see that there are in fact two buss bars. One of them is connected to incoming line 1 by a lug connected to the bar and the other is connected to incoming line 2. The problem that you're having is that both the black wire and the red wire from your fireplace are connected to the same incoming line. This is a common do-it-yourselfer mistake and is easily fixed.

First... are there any open spaces for breakers in your electric panel? If there are, all you have to do is buy a 2 pole circuit breaker of the same type as the original breakers that came with the house. Circuit breaker types are indicated by 2 or 3 letters marked on the circuit breaker. If this is a fairly new house, it will probably be a MP-T, QP, QO, or HOM type breaker. A 2 pole circuit breaker is completely different from a tandem circuit breaker. While they both have two separate handles, tandem circuit breakers are usually not connected at the handle and usually feed both circuits from the same incoming line on the electric meter. 2 pole circuit breakers, on the other hand, are connected so that they both get turned on and off at the same time. They also connect each individual handle to a different incoming line on the electric meter. Unless your electric panel is at least 40 years old and one of a few rare types, a 2 pole circuit breaker should be twice as wide as a regular single pole circuit breaker.

Now... if you don't have any open spaces for breakers in your electric panel, you'll have to put in some tandem breakers. Look at the two circuit breakers directly above the one that you installed for your fireplace. Hopefully, they're single pole circuit breakers that say 15 or 20 on them. Go to the store and buy either a 15/15, 15/20, or 20/20 tandem circuit breaker of the correct type. Connect the two circuits that you looked at earlier to the tandem breaker next to the appropriate rating. Install the tandem breaker into the space occupied by the top breaker of the two that you're working on and remove the bottom breaker that is now not connected to anything. BE VERY CAREFUL WHILE YOU ARE INSTALLING BREAKERS TO NOT TOUCH ANYTHING METAL WITH ANY PART OF YOUR BODY. Keep your fingers only on the plastic part of the circuit breaker and don't let your fingers or any rings or jewelry touch any metal part of the electric panel. You will now have an available open space and can proceed as described above. As always, do not attempt anything that you feel you are not qualified to safely do. An electrician or qualified handyman shouldn't cost more than about $150 to fix this problem for you, so call one if you're not sure.

Is a electric fireplace system better than using gas?




Amanda B





Answer
electric fireplaces are cleaner and for the most part safer than any fuel burning type. The "flames and logs" look pretty much the same. I just purchased an electric fireplace complete with a mahogany mantel. Its gorgeous!! and if you really just want the effect without all the hassles of installing gas lines and enlisting the services of plumbers and heating technicians, electric is a simpler choice.




Powered by Yahoo! Answers

Sunday, May 18, 2014

how do electric fireplaces work?




beach answ


would like to put an electric fireplace in my house, but don't know anything about them.

how do they work? does it just plug in? does it give off heat? use wood? expensive to operate? expensive to purchase? easily installed?



Answer
Electric fireplaces are really just decorative. a 110 unit will produce about 4,500 BTU worth of heat, a 220 will produce about 9,500. Not very much either way. They are VERY easily installed, plug it in and you're done, and fairly inexpensive to buy $300-$1500. A lot of the cost depends on the mantel you choose. They basically just use lights and mirrors to give the "flame" effect, but they're pretty cute.

How was made electric fireplace?




OligarX


I want to know more about electric fireplace, and make myself

What parts in it?
how it was made?
and I need the cheapest manufacturer.



Answer
an electric fireplace is just an electric heater in a package with a (typically opto-mechanical) display to look like a fire.




Powered by Yahoo! Answers

Friday, March 21, 2014

Wiring an electric Fireplace for 240v.?




Renovater


After wiring my cct brkr for 240v I had to have a repairman come in to see why my fireplace did not produce heat. He found that with the 4 wire connection, recommended, I was getting 117v from red to white and 117v from black to white. The problem being is that I also only read 117 from black to red, where it was expected to read 230-240v. Checked the wiring for my dryer which is also 240v, 4 wire and it did read 240v from black to red. Why do I only get 117 when I should be getting 240v?
Thanks everyone. I have already checked all connections. Cct breaker was pretty straightforward. I have the red and black on the single throw, double pole cct brkr. White goes to the neutral bar, bare to the ground bar. Checked at cct breaker, 117 at each from cct brkr from black to white and red to white and both read 117v. Between the red and black it read 0v. I double checked the dryer cct brkr and it read over on my 200v scale leading me to believe it was reading 240v.

It all seems very straight forward but I am not getting the expected values. Connections have been secured. Cct brkr is new and should not pose a problem because it gives me my 117 from each pole. Why would I get 0v when the dryer reads 240v? Is that the only difference between the cct brkrs is the dpst switch? What can I look for next?



Answer
Justwondering and Duncan are right. If you are getting 117V to ground on both legs and 0V difference between them, both breakers are on the same side of the electric service. In a residential single phase service, there are two wires that come out of the transformer from the electric company plus a common ground. Each of those two wires come out of the transformer 180 degrees from the other on the sine curve that alternating current can be represented with. Inside of your electric panel, you'll see a metallic buss bar that the circuit breakers are clipped or bolted to. If you look closely (don't EVER touch this with your body or anything that conducts electricity), you'll see that there are in fact two buss bars. One of them is connected to incoming line 1 by a lug connected to the bar and the other is connected to incoming line 2. The problem that you're having is that both the black wire and the red wire from your fireplace are connected to the same incoming line. This is a common do-it-yourselfer mistake and is easily fixed.

First... are there any open spaces for breakers in your electric panel? If there are, all you have to do is buy a 2 pole circuit breaker of the same type as the original breakers that came with the house. Circuit breaker types are indicated by 2 or 3 letters marked on the circuit breaker. If this is a fairly new house, it will probably be a MP-T, QP, QO, or HOM type breaker. A 2 pole circuit breaker is completely different from a tandem circuit breaker. While they both have two separate handles, tandem circuit breakers are usually not connected at the handle and usually feed both circuits from the same incoming line on the electric meter. 2 pole circuit breakers, on the other hand, are connected so that they both get turned on and off at the same time. They also connect each individual handle to a different incoming line on the electric meter. Unless your electric panel is at least 40 years old and one of a few rare types, a 2 pole circuit breaker should be twice as wide as a regular single pole circuit breaker.

Now... if you don't have any open spaces for breakers in your electric panel, you'll have to put in some tandem breakers. Look at the two circuit breakers directly above the one that you installed for your fireplace. Hopefully, they're single pole circuit breakers that say 15 or 20 on them. Go to the store and buy either a 15/15, 15/20, or 20/20 tandem circuit breaker of the correct type. Connect the two circuits that you looked at earlier to the tandem breaker next to the appropriate rating. Install the tandem breaker into the space occupied by the top breaker of the two that you're working on and remove the bottom breaker that is now not connected to anything. BE VERY CAREFUL WHILE YOU ARE INSTALLING BREAKERS TO NOT TOUCH ANYTHING METAL WITH ANY PART OF YOUR BODY. Keep your fingers only on the plastic part of the circuit breaker and don't let your fingers or any rings or jewelry touch any metal part of the electric panel. You will now have an available open space and can proceed as described above. As always, do not attempt anything that you feel you are not qualified to safely do. An electrician or qualified handyman shouldn't cost more than about $150 to fix this problem for you, so call one if you're not sure.

Is a electric fireplace system better than using gas?




Amanda B





Answer
electric fireplaces are cleaner and for the most part safer than any fuel burning type. The "flames and logs" look pretty much the same. I just purchased an electric fireplace complete with a mahogany mantel. Its gorgeous!! and if you really just want the effect without all the hassles of installing gas lines and enlisting the services of plumbers and heating technicians, electric is a simpler choice.




Powered by Yahoo! Answers

Friday, February 21, 2014

Is an electric fireplace worth it econmically?




Joe .


I live in upstate NY, I'm trying to determine is an electric fireplace can save money on my electric bill this winter.

Here is all the info about my sitution:
I live in a 1000sq Condo

electric heat via heat pump

usage during winter for heating as about 1100 KWh per month

electric is billed at $0.137 per KWh according to bill last week

I'm seeing on average electric fireplaces are about 5000BTU which use
about 1500 Kwh.

If I put the fireplace in the same room as thermoustat, my heat pump will run less, how much cooler will the rest of my condo be if I set the thermoustat at 70 degrees during the day and 60 at night

Will I save any money on electric bill my doing that



Answer
Electric fireplaces are very economical. They cost less to run than gas or wood, about 10x less. They can provide supplemental heat for a room up to 20x20. Here's a link to a place that sells electric fireplaces, you can get more info there. http://www.quicksupply.net/s-12-electric-fireplaces.aspx

Do electric fireplaces really look real?




Richie Ric


The ones I saw at walmart and homedepot look like crap. I looked online and some some from a company called Dimplex that looks pretty real. Has anyone bought one of these? Do they look real? I don't want to be be embarrassed with some piece of crap that I bought online and can't return. Does anyone have any other companies to suggest? Thanks.


Answer
do electric fireplaces look real?...well they kind of do, but the better electric fireplaces are not going to be at a big box store, you really need to visit a specialty fireplace shop. Any shop worth its bricks will carry a good brand that looks more realistic.
Overall though you are not going to fool anyone that an electric fireplace is a real one. They are an aesthetic all their own.
Personally i like the look of them and they are easy to operate but they are not going to fool anybody into thinking they are real.




Powered by Yahoo! Answers

Thursday, February 20, 2014

Electric Fireplace?




Andy D


I live in an apartment, with electric baseboard heat. I bought an electric fireplace, with hopes that it would lower my electric bill a little, and look nice at the same time. It doesn't seem to heat very well. Should I return it and get something different? Maybe a space heater with a bit more powerful of a fan? I'm just looking for something to supplement the electric baseboard, because it can be VERY expensive to run.

Thanks!



Answer
Electric fireplaces are basically for looks. And a space heater can be very dangerous if knocked over or can get really hot. If you live in the middle of the apartments... meaning not on a corner unit and not on the top floor I wouldn't worry about heating. You are going to get a lot of heat from the other apartments. I would just buy some extra blankets and get some sweats. When I have lived in apartments and now I live in a town home in the center the heating has never been an issue. I have had to many times have the patio door open to get rid of the excess heat. And I live in Minnesota!

What is an electric fireplace?




aaldridge2


How would you install it and what is needed. Where can i get one? What would also be an option I dont want to have it installed by a professional, but i want to have a form of heat in an existing fireplace that is non-usable.


Answer
An Electric Fireplace is nothing more than an Electric HEATER that looks like a fireplace.I do not recommend it, as it is a waste of money.Just buy an electric heater.9/12




Powered by Yahoo! Answers

Electric Fireplace?




Andy D


I live in an apartment, with electric baseboard heat. I bought an electric fireplace, with hopes that it would lower my electric bill a little, and look nice at the same time. It doesn't seem to heat very well. Should I return it and get something different? Maybe a space heater with a bit more powerful of a fan? I'm just looking for something to supplement the electric baseboard, because it can be VERY expensive to run.

Thanks!



Answer
Electric fireplaces are basically for looks. And a space heater can be very dangerous if knocked over or can get really hot. If you live in the middle of the apartments... meaning not on a corner unit and not on the top floor I wouldn't worry about heating. You are going to get a lot of heat from the other apartments. I would just buy some extra blankets and get some sweats. When I have lived in apartments and now I live in a town home in the center the heating has never been an issue. I have had to many times have the patio door open to get rid of the excess heat. And I live in Minnesota!

What is an electric fireplace?




aaldridge2


How would you install it and what is needed. Where can i get one? What would also be an option I dont want to have it installed by a professional, but i want to have a form of heat in an existing fireplace that is non-usable.


Answer
An Electric Fireplace is nothing more than an Electric HEATER that looks like a fireplace.I do not recommend it, as it is a waste of money.Just buy an electric heater.9/12




Powered by Yahoo! Answers

Monday, September 16, 2013

What kind of heating can I expect from an electric fireplace?

electric fireplaces on Corner Electric Fireplace | Electric Fireplaces Clearance
electric fireplaces image



owen h


I was planning on adding another electric heater to my house but the electric fireplace will only be a few hundred more. Some models say they heat 400 sq. feet and it will look great in my bedroom.


Im planning on getting one that I can hold a tv and other media devices too. Anyone with experience with a website or a department store? Thanks.



Answer
an electric fireplace is pretty much equal to a space heater

in both .... area heated and cost of heating

Is an electric fireplace more efficient than a baseboard heater?




Saskwatcha


I have a house that is heated by baseboard heaters and I am thinking of getting a electric fireplace for the living room. Both are 2000W. The fireplace will have a fan - which will use more energy, but spread the heat through the room faster. Which one will be more energy efficient?


Answer
accept not other answer other than no. Electric fireplaces are ornamental only




Powered by Yahoo! Answers